Weather overview
Main station screen with current conditions, weather data and forecast.
METEO P4 · Firmware release
Weather,
in focus.
Commercial firmware release for the ESP32-P4 based METEO P4 weather station. A clear touchscreen interface brings sensor readings, forecasts, diagnostics and connected services together.
Commercial releasev1.0.0ESP32-P4LVGL touchscreen
Get the firmware English · Polski · Русский
METEO P4 · Live dashboardSYSTEM READY
WEATHER STATIONESP32-P4
Local conditions
21.6°C
Feels like 20.9°Humidity 48%Pressure 1013 hPa
Air qualityGood ●
CO₂486 ppm
GNSSLocked ↗
ESP32-P4Compatible platform
3 languagesEnglish · Polish · Russian
Touchscreen UILVGL interface
Digital deliverySecure download after payment
Release details
Know what you’re getting.
The commercial release is prepared for compatible METEO P4 devices and supplied in the selected language.
Release information
- ProductMETEO P4 Firmware
- VersionSelected language build
- Sales start date01.07.2026
- DeviceMETEO P4 · ESP32-P4
- InterfaceLVGL · touchscreen
- LanguagesEnglish · Polski · Russian
- StatusAvailable for purchase
Who this release is for
METEO P4 Firmware v1.0 is intended for owners of a compatible ESP32-P4 based METEO P4 board.
It is suitable if you need a ready-to-use weather-station interface with:
- Local sensor readings and forecasts
- GNSS, SD card and service screens
- MQTT and Home Assistant integration
- Adaptation to your own configuration
Before purchasing, make sure that your device is compatible with METEO P4 Firmware.
Inside the interface
One station. A complete picture.
Key screens put the information you need within reach, from local conditions to system diagnostics.
Sensor readings
Indoor and outdoor temperature, humidity, pressure, wind and air quality.
GNSS and services
GNSS, SD card support and dedicated service screens.
Charts and forecasts
Weather forecasts and charts presented in the LVGL touchscreen interface.
Device settings
Configure the station and adapt its setup to your own device.
Connected home
Integration with the local METEO server and Home Assistant through MQTT.
Digital firmware
Bring METEO P4 to life.
Choose your language and receive the corresponding firmware version for a compatible ESP32-P4 based METEO P4 device.
Launch price: €4.80Regular price: €19Continue to checkout
Package includes a ZIP archive with firmware in the selected language, installation instructions for that version and a secure download link after payment confirmation.
Technical information
Compatibility and setup.
01 System requirements
- METEO P4 device based on ESP32-P4.
- Compatible board and display version.
- Supported project sensors.
- Correct device power supply.
- A PC for firmware installation.
02 Platform and integrations
METEO P4 is built on the ESP32-P4 platform with an integrated ESP32-C6 chip. It features a 1024×600 colour touchscreen, 32 MB PSRAM, 16 MB flash, Wi-Fi 6, Bluetooth 5, 100 Mbps Ethernet, local sensors, GNSS, and MQTT/Home Assistant integration.
The firmware supports temperature, humidity, pressure and air-quality readings, weather forecasts, charts, diagnostics, SD card functions, GNSS and Home Assistant integration through MQTT Discovery.
03 Installation instructions
Follow the instructions supplied with your selected release and verify the device after flashing.
- Check device model and board compatibility.
- Back up current firmware and settings where necessary.
- Connect the device to a PC.
- Flash firmware according to the release instructions.
- Check the display, sensors and server connection.
04 Changelog · commercial release
Builds prepared
20 June 2026
20 June 2026
Separate single-language releases are available in English, Polish and Russian. The commercial release does not contain saved Wi-Fi networks, passwords, MQTT settings or personal data from the original device owner. After flashing, the customer configures Wi-Fi, GNSS and, if needed, their own MQTT server.
- Removed the original owner's personal Wi-Fi, MQTT and server settings.
- Fixed initial Wi-Fi setup and weather refresh after network connection.
- Increased the Wi-Fi task stack to reduce restart risk during scanning and password entry.
- Fixed operation without an SD card and after SD card removal.
- Improved diagnostics for memory, FreeRTOS, network, power and sensors.
- Fixed Polish localisation and prepared separate RU, EN and PL instructions.